Dec 27

My Complete Audio Mastering Tutorial

Audio mastering is more than just boosting volumes or even putting together a completed album file to be sent off and replicated. The most important part of mastering is certainly the aspect of enhancing and improving the audio itself as much as mastering tutorial

All throughout the music production process you are working to create the best sounding record possible. After you have chosen your guitar sounds and recorded the various tracks which make up your songs and even going through the process of mixing them, there is still work to be done in the mastering stage.

Through the artful and effective implementation of effects like reverb you can bring out the full and true potential of a song as a last step before releasing it to your listeners. You can think of mastering as a kind of final quality assurance in a number of ways but it can be expensive depending on the engineer you go with to have it done professionally.

Some engineers charge upwards of over $50 for a single song which can really break the bank when you’re putting together a 10 or 12 songwriter. For all of this, I’ve put together my own audio mastering tutorial which you can use to achieve and realize the ceiling of potential in your own music.

I mentioned EQ in opening. Equalization analog or digital of fact which separates the full audio spectrum of your song into different bands of frequency. Most commonly you’ll find either a three or four band equalizer which break your music up into low mid and high ranges which you can then tweak further to improve the sound and diminishing or boosting the presence of each one of those bands.

Tweaking different bands will yield different results. For instance, boosting the low end will give your record a figure based year town. On the other end you can boost the high frequency to get a cleaner sound but if you abuse it and go too far in that direction than you’ll find the music will get to tinny and certain vowels and the vocals will have too much sibilance.

You can boost ranges to make up for voice which existed in the recording stage and compensate when something was lacking. On the other hand if something is straining the mix, you can diminish its influence just as easily by dropping that band in the area that you want.

Other effects can be used like reverb to give your song more atmosphere and add a bit of gloss to record which sounds too flat. Compressors can be used to limit the threshold of your audio when necessary, as well. Most of these effects are readily available in most digital audio workstations and there are number of free digital audio workstations available for download online. To simply upload the file for your song which you want to edit and master into your digital audio workstation and add these effects accordingly.

One final word of advice is that you should always upload the best quality files as possible before editing. As an example is much more preferable to upload a wave file of the song over an MP3 or other compressed file type which sacrifices quality for a smaller file size.

Remember that not all mastering studios will break your bank. Music Guy Mastering is currently offering a five dollar special on individual tracks. You need to hear the quality on your own music to believe it for yourself so receive your free test master right now by uploading one of your own songs and hearing the music guy mastering difference today by clicking on this link.

Dec 16

What is Mastering?

One of the most often misunderstood terms and aspects of audio production relates to mastering. Most people ask what is mastering because they have no concept of what goes into it and why it is necessary. This article is going to answer the question what is mastering and remove the confusion surrounding it.

When you get down to it, mastering is a two-part process. You can actually just be a one part process depending on what you want to have done. Let me explain.what is mastering

The first part of mastering which applies to everyone who gets it done generally refers to the actual audio adjustments. After the band or musician has recorded their song and all the different tracks which make up that song, those tracks are rendered down into a final mix. This is a singular file which has all the tracks mixed precisely how the artist or mixing engineer wants them to give it the strongest and best possible sound.

That single file which represents a particular song is then sent off to a mastering engineer in order to enhance that found further. This involves applying popular plug-ins and effects such as compression and equalization and reverb to that final mix file. Many of these effects can be used in the mixing stage but you generally don’t want to apply one single effect to an entire set of tracks but instead you want to apply them to one single file as this will yield a different result. The differences are not applying compression to 24 individual tracks at once, you’re applying it to one single track which has already been rendered.

The effect of a good mastering job is like removing the wrapping from the songs to hear it more crisply and with more clarity. A lot of people make the mistake of assuming that mastering simply boosts the overall volume of a song and while this is generally a byproduct of mastering, this should never be your end goal.

In addition to enhancing and improving the audio itself, the other half of mastering involves writing data to each individual song and creating an album file out of those songs. This includes things like setting the table of contents and setting the transitions between each track in terms of spacing or whether they flow into one another.

Another important part is ensuring that the entire album as a whole is in very in terms of volume with itself and all the different tracks which make it up. The engineer also make sure that the overall album file is on par with other contemporary records in terms of volume as a whole.

Those last two points ensure that there are no jumps were dropped in volume within the record itself and that individual tracks on the record when taken out of context of that record are still at comparable only levels with other contemporary songs of the day so that when someone is listening to one of your songs and a mix along with songs from other artists, there are no significant jumps or drops in volume.

Dec 05

Why Should You Be Interested in Mastering Music?

Mastering music is the final aspect of audio production, occurring in the post production stage and can do so much to bring out the full but hidden potential of your music. A lot of artists do not understand the point of mastering music or don’t fully understand what is involved in it, so in this article we are going to talk about why you should be interested in mastering music.mastering music

First off, mastering music ensures that every track which make up your album are all on the same volume level with one another. This is a problem with unmastered audio because when songs are recorded, they are often done so in different settings with different setups. Some songs with less tracks which make up those songs will be quieter overall than a song with lots of tracks which were recorded possibly with more gain.

Ultimately the mastering engineer ensures that each of these songs are on the same volume level with one another so that they place flawlessly next to one another on your record with no noticeable jumps or drops in volume.

Secondly and in the same vein, mastering music boosts the volume of the entire record to be on point with the standards of the music industry. This is the most misunderstood aspect of mastering because most people assume that this is all that the process is, just making the music louder.

The truth is, music which is recorded in less than ideal conditions sounds better louder than it does quieter as you can more clearly hear the dynamics, and a lot of low quality engineers don’t enhance the audio but simply boost the volume to give the impression of improving the audio. Some of them even advertise this point exclusively to their unwitting audience of artists who don’t know any better, but the true purpose of mastering music is my next point.

The most important point of mastering music is to make it sound better, and in the hands of an engineer who really knows what they are doing, it sounds a lot better. If you knew the difference then you would never even think about releasing your music to your fans before a quality mastering job. This difference is accomplished through the artful application of effects and plugins such as eq which breaks the audio spectrum into more specific bands or ranges for better editing to supplement the mix where necessary and compression and limiters to address clipping and to give the track more unity overall.

Experience the different today at